DP 10-4H Drum Puller

The DP10-4H is a compact and portable hydraulically powered 4 drum puller. Designed as a light distribution puller, it can also serve as a pilot line winder. The pulling unit can be removed from the trailer and pole mounted with power supplied by the integral power-pack or from a line truck. Power is transmitted to the drums through a common drive train. A diamond leadscrew levelwind accommodating one reel at a time, provides an even wrap during the pull. Individual overspin brakes can be controlled manually or with a hot stick.

Performance

(based on 57 liters/min @ 13.8 Mpa / 5 gpm @ 2000 psi)
Rated linepull
Empty drum 734 daN (1650 lbs)
Full drum 389 daN (875 lbs)

Max linepull ( @ 20 Mpa (3,000 psi) intermittent)
Empty drum 888 daN (2000 lbs)
Full drum 444 daN (1000 lbs)

Linespeed
Empty drum 0-82 m/min (0-270 fpm)
Full drum 0-164 m/min (0-540 fpm)

Average linespeed 120 m/min (396 fpm)

Reel Capacity
8 mm (5/16”) rope, 2591 m (8,500 ft)
10 mm (3/8”) rope, 1829 m (6,000 ft)
11 mm (7/16”) rope, 1371 m (4,500 ft)
12 mm (1/2” rope), 1066 m (3,500 ft)

Standard Equipment

Single axle trailer with 2,358 kg (5200 lbs) axle
13 kW (18 hp) air-cooled engine
22 liter (6 gallon) fuel tank
44 liter (12 gallon) hydraulic tank
Diamond leadscrew levelwind
Free wheeling drums with disc overspin brakes
Fine control manual calipers on overspin brakes
Individual drum clutches
Anti-rotation device on drive system

Unit Dimensions (Approx.)

Length 3429 mm (135”)
Width 2337 mm (92”)
Height 1880 mm (74”)
Weight (w/o rope) 1451 kg (3200 lbs)