T200-4H/4 Hydraulic Bullwheel Tensioner

The T200-4H/4 is capable of tensioning 1,2,3 or 4 conductors with infinite variable tensioning control.

The bullwheels are independently controlled with the ability to be coupled to increase tension capability. The machine is also capable of full pull-back at reduced linespeed.

The trailer is equipped with high flotation tires suitable for pulling the unit through sand or swamp land conditions. The frame is fitted with a single point lift to allow lifting with a crane.

Performane Features

Maximum Pull / Tension4 x 5000 daN (11,240 lbs.)
2 x 10,000 daN (22,481 lbs.)
Maximum Linespeed5 km/hr (3.1 mph)

Tensioner Bullwheel Specifications

Bullwheel diameter
Wear resistant nylon bullwheel segments
5 grooves per bullwheel set
1500 mm (60”)
Maximum conductor diameter43 mm (1.7”)

Engine Specifications

Air-cooled brand name diesel engine97.0 kW (130 hp)

Mechanical Drive Specifications

Fully enclosed planetary gearbox drive
Infinite variable speed, linepull and tensioning control
Automatic over-pull protection system with linepull gauge
Heavy duty hydraulic oil cooler
Replaceable hydraulic oil filters complete with visual dirt alarms

Safety Features

Spring applied / hydraulic pressure released brakes on bullwheel drives apply automatically in the event of hydraulic circuit pressure loss or engine shutdown
Overpull protection to set maximum linepull

Physical Dimensions

Weight (Approx.)10,138 kg (22,350 lbs.)
Length (Approx.)5580 mm (220”)
Width (Approx.)2350 mm (93”)
Height (Approx.)2467 mm (97”)


Auxiliary hydraulic circuit (700 bar) to operate conductor press
Auxillary hydraulic circuits to power and control separate hydraulic reel winder
Digital distance readout
Full PLC control panel
Air-ride axle suspension
Highway lighting
Air actuated trailer brakes