The T75-2H/2DD is capable of tensioning 1 or 2 conductors with dual hydraulic infinite variable tensioning control allowing independent control of each individual conductor.
The bullwheels may be coupled for increased tension control with the capability of full pullback of each conductor at slow speed. The exclusive open-sided canted bullwheel design prevents potentially damaging birdcaging or torquing of the conductor/OPGW. This design also allows for a more compact machine.
The trailer is equipped with high flotation tires suitable for pulling the unit through sand or swamp land conditions.
Performance Features
| Maximum Pull/Tension | 1 x 7500 daN (16,500 lbs.) 2 x 3750 daN (8250 lbs.) |
| Maximum Linespeed | 5 km/hr (3.1 mph) |
Puller / Tensioner Specifications
| Bullwheel diameter Exclusive canted axis bullwheel design Open side design for ease of conductor loading Wear resistant nylon bullwheel segments 5 grooves per bullwheel set | 1500 mm (60”) |
| Maximum conductor diameter | 43 mm (1.7”) |
Engine Specifications
| Air-cooled diesel engine | 22 kW (29 hp) |
Mechanical Drive Specifications
Fully enclosed planetary gearbox drive
Infinite variable speed, linepull and tensioning control
Automatic over-pull protection system with linepull gauge
Auxillary hydraulic circuits to power and control separate hydraulic reel winder
Safety Features
Spring applied / hydraulic pressure released brakes on bullwheel drives apply automatically in the event of hydraulic circuit pressure loss or engine shutdown
Overpull protection to set maximum linepull
Physical Dimensions
| Weight (Approx.) | 5200 kg (11,500 lbs) |
| Length (Approx.) | 4877 mm (192”) |
| Width (Approx.) | 2286 mm (90”) |
| Height (Approx.) | 2946 mm (116”) |
Options
Highway lighting
Manual parking brake
Lockable console cover
Auxiliary hydraulic circuits to operate reel stands
Auxiliary hydraulic circuit to operate conductor press
Master control to operate two tensioners from one control
Electronic controls