The PT90-2H/2DD is a direct drive puller-tensioner capable of pulling or tensioning 1 or 2 conductors with independent controls.
The bull wheels may be coupled for increase pull or tension control.
The PT90-2H/2DD is specially equipped with a heavy duty hydraulic cooler to ensure proper operating temperature of the hydraulic system.
The trailer is equipped with high flotation tires to ease transport over rough terrain or sandy and swamp conditions.
|Max Pull/Tension||1 x 9,000 daN (20,232 lbs)|
2 x 4,500 daN (10,116 lbs)
|Max Pull/ Tension speed||5 km/hr (3.1mph)|
Tensioner Bull Wheel Specifications
|Bull wheel root diameter|
Wear resistant nylon bullwheel segments
|5 grooves per bullwheel set||50mm (2.0”)|
|Maximum conductor diameter|
Exclusive Canted bullwheel design eliminates torsional stress on conductor during stringing operation
|Water cooled diesel engine||97kW (130 hp)|
Hydraulic Drive Specifications
Fully hydraulic drive with two independent circuits
Infinitely variable speed control
Dual speed gearboxes for low tension OPGW stringing
Independent bullwheel control with master control
Lockable bullwheels suitable for pulling 1 x 9,000 daN (20,232 lbs)
Auxiliary hydraulic circuits to operate two independent hydraulic reel stands/winders.
Spring applied, hydraulic pressure released brakes on bullwheel drives apply automatically in the event of hydraulic circuit pressure loss or engine shutdown. Operator can preset maximum linepull or tension.
|Weight (approximate)||5896kg (12,998 lbs)|
|Length (approximate)||3962mm (156”)|
|Width (approximate)||2312mm (91”)|
|Height (approximate)||2337mm (92”)|
Fully electronic IQAN MDL controlled operator panel
Radio remote control
Dual integral reel winders
Engine sound abatement
Digital distance readout